May 30 2015

GNMS-500GL 500GPM mud recycling and mixing system is a top configuration of 500GPM Horizontal Directional Drilling ( HDD ) mud system with 3 phase cleaning equipment with mixing equipment . It is 40ft container size mud tank to allow more tank capacity . GN Solids just deliveried one set GNMS -500GL mud system for China local HDD client last week to jobsite for operation .

Main Technical Specification Of GNMS -500GL Mud System

40 ft container size mud tank for 24.5 cubic meters mud tank capacity and total power 135 KW , the max land transport dimention will be within 12192 x 2582 x 3442 mm which can allowed all equipments stay on tank side and walkways folded for delivery .

2 sets 7.5KW mud agitator installed for clean mud tank compartment to avoid solids settling down .

One set GNZS703 –DZ shale shaker with 500GPM mud flow capacity for 40 mesh size shaker screen . It is 3 decks with 2.63 square meters screen size and 7.0 G force vibration by two sets vibrating motors .

1 x 10 inch desander and 8 x 4 inch desilter installed on a same mode GNZS703 shaker , the desander will work to separate solids above 50 – 60 microns and desilters will work to separation solids above 20 microns . The bottom shaker from cyclone will collect solids discharged from desander and desilter then recycling fluids particals and discharge wet solids .

A mixing hopper installed on tank top with one set mixing pump sit on tank skid to mixing new mud . The mixing pump get an T inlet and a T outlet to allow mixing pump work as a transfer pump to suction mud from other tanks and discharge into mud recycling tank or suction from mud recycling tank and discharge to other tank which met a more application .